Operation method of organic fertilizer machine in use
Date:2019/12/11
During the operation of organic fertilizer machine, there are about four situations as follows:
1. Before starting the organic fertilizer machine:
Since all parts of the new equipment have not been run in yet, it is necessary to heat up the equipment for the first start-up, which generally requires 40-50 minutes. For specific operation, first raise the temperature to the point where you can pull the motor V-belt by hand until it is free, and then pull the motor continuously for 8-10 times according to the normal operation option. Then keep warming for about 10 minutes.
2. Temperature control after startup:
Before startup, we have conducted preliminary temperature adjustment for the equipment. The treatment of materials in the fertilizer production process is determined according to the characteristics of the materials themselves. Therefore, after startup, we need to continue to heat up, because the normal production needs to continue to supplement heat; adjust different temperatures according to different properties of plastic materials.
During normal operation, the temperature of the machine shall be kept stable, not high or low. Near the blowhole, keep the temperature of the machine head at about 200 ℃. At this temperature, it can generally have a good processing for most materials.
4. Organic fertilizer machine shutdown:
First of all, cut off the power supply of the host machine, and remove the head plug of the equipment. Preheat separately before next use.
1. Before starting the organic fertilizer machine:
Since all parts of the new equipment have not been run in yet, it is necessary to heat up the equipment for the first start-up, which generally requires 40-50 minutes. For specific operation, first raise the temperature to the point where you can pull the motor V-belt by hand until it is free, and then pull the motor continuously for 8-10 times according to the normal operation option. Then keep warming for about 10 minutes.
2. Temperature control after startup:
Before startup, we have conducted preliminary temperature adjustment for the equipment. The treatment of materials in the fertilizer production process is determined according to the characteristics of the materials themselves. Therefore, after startup, we need to continue to heat up, because the normal production needs to continue to supplement heat; adjust different temperatures according to different properties of plastic materials.
During normal operation, the temperature of the machine shall be kept stable, not high or low. Near the blowhole, keep the temperature of the machine head at about 200 ℃. At this temperature, it can generally have a good processing for most materials.
4. Organic fertilizer machine shutdown:
First of all, cut off the power supply of the host machine, and remove the head plug of the equipment. Preheat separately before next use.